English 
English Views: 75 Author: Site Editor Publish Time: 2021-10-28 Origin: Site
All guest rooms of the hotel are equipped with door bolt lock and non-contact induction card is selected as the door opening card. The designated guest room door can be opened through the authorization of the service desk. It has the measures to prevent card theft. It can unlock by standby means in case of emergency and has the function of reading unlocking information.
The thickness of steel lock button is not less than 25.4 mm to ensure the safety and reliability of the mechanism. Bearings shall be self-lubricating to extend service life. All lock tenon of mortice bolt locks must meet ANSI and EURO lock standards. The structure of the lock shall be of modular design for easy removal and maintenance. The fire resistance test for more than 3 hours shall be met. The memory in the lock can easily upgrade the electronic control program of the lock on site without replacing expensive hardware mechanism.
The micro-computer chip in the lock can judge the authority of various door opening cards and realize multi-level management. At least 200 opening and locking records can be recorded in the drop bolt lock. The clock in the lock is synchronized with the system setting, error free, and it will not cause the room card to fail in advance or delay. The electronic mechanism must be enclosed and installed inside the lock mechanism and can not be easily contacted to increase the security of the lock. Emergency mechanical unlocking device with high safety shall be provided. The door lock handle conform to ergonomics and meet the requirements of barrier free use.
The door lock can store more than 864 records and save the record of black bolt lock of mechanical key unlocking. If it suffers loss by theft, the truth can be found out.
All key cards have a time limit function. Card can automatically stop using for the expired guest to avoid the phenomenon that the guest defaults on the room fee.
The standby mechanical key can be applied to unlock the door in case of emergency, such as electronic failure and fire alarm, and the emergency card escape setting function is provided to ensure that the bolt lock for bedroom door of guest room is 100% opened and absolutely safety of the guest.
The easiest way to add security to a hotel room is to use a rubber door wedge for residents. They are cheap, taking up almost no space in the bag, and can be installed in seconds. Put the thin end under the latch, and then gently move the hotel door wedge to a proper position and fix it. Target door wedge works best on hard surfaces, such as wood or tile. There are also models with alarm, which will alarm when the door insulation wedge is disturbed.
Portable door locks come in different shapes and styles, but the principle is similar. All can prevent the door from opening inward.
These infrared sensors can be placed by windows, doors or anywhere else in the room (except beds). When objects are detected to move, they will give an alarm.
A common type of alarm can be hung on the door handle. When the door opens, it will make a loud alarm. It only takes a few seconds to set it up, very convenient.
If there is concern that employees and others can still enter with spare key, the lockpin will make people feel more relieved. The locking pin makes it impossible for anyone to open the magnetic bolt lock from the outside, whether other people are with or without a key.
The concept of modern hotel door lock management has undergone a qualitative change from simple and low-level security management to high-level intelligent management system. Selection of a good hotel door lock will have a great impact on the convenience and security of guests.
