English 
English Views: 83 Author: Site Editor Publish Time: 2021-11-21 Origin: Site
Brass products can accumulate dirt and grease and may become turbid over time. If brass things are wanted to be cleaned, such as brass pull handle, here are several cleaning methods to make the long brass handles as clean as new.
First remove dust with a soft cloth, then soak the soft cotton cloth with warm water detergent to make sure it is only slightly damp. Wipe the brass surface gently. When the surface is cleaned, soak the cloth in clean water. Wring it out and wipe the object again to avoid soap residue. Finally, take a dry cloth to dry it.
Place the brass object in hot water. And make sure it starts to expand slightly. The paint begins to expand with the metal, but when the object cools again, it shrinks slightly and this does not happen to the coating. When the object is very cold, the varnish will peel off from its surface.
Make sure the brass is clean. Squeeze the juice into a small bowl with half of a lemon. Add some soda or salt. Coat the paste on the brass object with a soft cloth. Salt or soda water can also polish brass.
Undiluted white vinegar or ammonia can effectively clean antique brass products. Soak the object in ammonia or vinegar for at least one hour. Both products are natural detergents that give brass a lasting luster.
Spread the ketchup on the brass with a soft cloth. Hold for at least 10 minutes and then wipe with a clean wet cloth. Finally, dry the object thoroughly.
Apply white yogurt to the brass object. Lactic acid in yogurt can decompose the sludge on the object. Let the yogurt dry, then rinse with water and dry the brass thoroughly.
Protect brass from splashing water. Brass products shall be protected by painting after cleaning. Paint can be applied with a cotton swab or paint brush. Use varnish according to instructions. Let the brass dry thoroughly after painting. After the varnish is dry, wipe the object with a clean cloth to make it more glossy.
(1) Cleaning agents containing acid-base components must not be used when it is cleaned. This kind of cleaner will corrode the metal, thus directly reducing the service life of antique brass drawer pulls handles.
(2) The installation of brass door pull handles must be carried out after the decoration and cleaning of the room, so as to prevent the handle from being damaged or scratched during the construction.
(3) Dry it directly with a soft dry cloth when it is cleaned. If it is the brass kitchen knobs and pulls in the kitchen, because there are many oil stains, be stained with talc powder and vigorously wipe the surface of kitchen handles brass with a clean cloth and then the effect is excellent.
(4) Under normal circumstances, the gold brass handles should be cleaned once or twice every other week to better keep the handle clean. In addition, frequent utilization of vintage brass door pulls will produce bacteria, so if it is cleaned regularly, it can also ensure good health.
Be careful not to leave scratches on the antique brass flush pull handles during operation.
