How to Ensure the Safety of Doors?

Although aluminum alloy doors and windows have been recognized by many owners in China, most families and owners hope to take more protective measures on aluminum alloy doors and windows including some industrial door, such as installing multiple brass locks on doors, installing small door viewer, using brass door hardware etc. Nowadays, with the advancement of manufacturing technology and methods, people can do better and more safety protection for the doors and windows. The following are methods to improve the safety of doors and windows including industrial doors to ensure that the door and window installation is safe. 

 

Install anti-theft locks on doors and windows

 

Anti-theft brass lock is one of the most innovative and simple solutions for fixing aluminum alloy doors and windows. As the name suggests, these brass locks have multiple brass locking points along the length of the door or window, usually at least there are three plus the brass latch. This makes it very difficult for intruders to gain access by fiddling with the latch, and even if they manage to open a brass locking point, but others can be passed through.

 

Check glass installation

 

The intruder is known to be able to remove some beads on the window, and use it to remove the glass and enter in the house. Sadly, this is usually just because of poor material quality or improper installation. What people need to pay attention to is that all the materials must be in good condition before starting the installation. If there is any damage during transportation, please replace them first. And people must ensure that the rubber ring is installed correctly, and remember to cut off the back of the corners so that they fit and will not protrude and damage the seal ring. Once it's done, make sure to knock the gasket into the bead firmly, but be careful not to damage the glass.

 

The wire rope anti-dropping device for the new industrial door

 

Usually it works as a safety. When the wire rope breaks, the anti-falling blade bolts will jam the trailing foot on the track, the door stops within 20cm, it is installed at the bottom of the door body, the wire rope is buckled around two feet, and the device is added. It can effectively prevent the emergency situation of wire rope breaking.

 

The wireless transmission of the airbag for the new industrial door

 

The wireless transmission of the airbag is difficult to rebound. When the lifting door is descending, if the bottom of the rubber strip encounters an object, the door body will stop immediately or lift in the opposite direction which can effectively avoid inconvenience caused by the mechanical lifting door since the door is very sensitive to open the wireless airbag. Usually the wireless airbag is installed at the bottom of the rubber belt.

 

The torsion spring anti-breaking device is installed on both sides of the brass torsion spring. When the torsion spring breaks, it can block the door and stop the door from falling, which can keep safety. But it is recommended to use good brass anti-breaking device.